<

WOT Spark Advance VS RPM

Definition: total timing vs rpm at wide open throttle

Platform:

Min Value:

Max Value:

Description:
This function is used during WOT operation. Contains the total timing. The Sealevel table is NOT used during WOT operation. The first number is RPM and the second is timing advance. This table sets the minimum spark during WOT operation. This table is compared to the spark tables and the lower value will be used. This table is used when the TPS voltage reaches 3 volts or higher.

Hints:
The first number is RPM and the second is timing advance. This table sets the minimum spark during WOT operation. This table is compared to the spark tables and the lower value will be used. This table is used when the TPS voltage reaches 3 volts or higher.
You can change any of the RPM values except the low and high values, which must remain at 0 and 16383.8 respectively.
The A9L family uses WOT spark advance vs RPM as the total advance at WOT, there is a scalar WOT Spark Adder that can be/is added to the WOT curve. It includes the assumed 10^ at the distributor.
Total timing at WOT is WOT Spark Advance vs RPM plus the Spark Adder for WOT.

---

Also see: WOT TPS BREAKPOINT VOLTAGE